Circular, rectangular and square hollow sections for construction, fencing and machinery.
Zaimex Steel's circular, square and rectangular hollow section pipes are manufactured from galvanized steel to first-quality TS 10305-3 / DIN 2394 / EN 10219-2 standards. Galvanized hollow sections have become the material of choice across a wide range of applications — structural framing, facade cladding, machinery manufacturing, interior and decorative fit-out, wet environments such as pools and spas, wrought-iron fencing and gate systems, and especially agricultural structures and greenhouse construction.
Because our profiles are produced directly from galvanized coil rather than hot-dip galvanized or electrostatically painted after fabrication, they offer clear practical and cost advantages: no anti-corrosion primer or top-coat is required after installation, which removes an entire step — and its cost — from the project.
Available dimension and wall-thickness combinations for our square, rectangular and circular hollow section profiles.
| Kalınlık / Thickness (mm) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions (mm) | 0.60 | 0.70 | 0.80 | 0.90 | 1.00 | 1.20 | 1.50 | 2.00 | 2.50 | 3.00 |
| 15×15 | X | X | X | X | X | X | ||||
| 15×25 | X | X | X | X | X | X | ||||
| 15×30 | X | X | X | X | X | X | X | X | ||
| 15×50 | X | X | X | X | X | X | X | X | ||
| 15×60 | X | X | X | X | X | X | X | X | ||
| 20×10 | X | X | X | X | X | X | ||||
| 20×20 | X | X | X | X | X | X | X | |||
| 20×25 | X | X | X | X | X | X | X | X | ||
| 20×30 | X | X | X | X | X | X | X | X | ||
| 20×40 | X | X | X | X | X | X | X | X | ||
| 20×50 | X | X | X | X | X | X | X | X | ||
| 20×60 | X | X | X | X | X | X | X | X | ||
| 20×70 | X | X | X | X | X | X | X | X | ||
| 20×80 | X | X | X | X | X | X | X | X | ||
| 25×15 | X | X | X | X | X | X | ||||
| 25×25 | X | X | X | X | X | X | X | |||
| 25×35 | X | X | X | X | X | X | X | X | X | |
| 25×40 | X | X | X | X | X | X | X | X | X | |
| 25×50 | X | X | X | X | X | X | X | X | ||
| 25×60 | X | X | X | X | X | X | X | X | ||
| 25×70 | X | X | X | X | X | X | X | X | ||
| 30×10 | X | X | X | X | X | X | ||||
| 30×15 | X | X | X | X | X | X | X | |||
| 30×20 | X | X | X | X | X | X | X | X | X | |
| 30×30 | X | X | X | X | X | X | X | X | X | |
| 30×40 | X | X | X | X | X | X | X | X | X | |
| 30×50 | X | X | X | X | X | X | X | X | ||
| 30×60 | X | X | X | X | X | X | X | X | ||
| 30×70 | X | X | X | X | X | X | X | X | ||
| 30×80 | X | X | X | X | X | X | X | X | ||
| 35×10 | X | X | X | X | X | X | ||||
| 35×15 | X | X | X | X | X | X | X | |||
| 35×25 | X | X | X | X | X | X | X | X | X | |
| 35×35 | X | X | X | X | X | X | X | X | X | |
| 35×50 | X | X | X | X | X | X | X | X | ||
| 35×60 | X | X | X | X | X | X | X | X | ||
| 40×10 | X | X | X | X | X | X | ||||
| 40×20 | X | X | X | X | X | X | X | X | ||
| 40×30 | X | X | X | X | X | X | X | X | X | |
| 40×40 | X | X | X | X | X | X | X | X | X | |
| 40×50 | X | X | X | X | X | X | X | X | ||
| 40×60 | X | X | X | X | X | X | X | X | ||
| 40×70 | X | X | X | X | X | X | X | X | ||
| 40×80 | X | X | X | X | X | X | X | X | ||
| 45×45 | X | X | X | X | X | X | X | X | X | |
| 45×—† | X | X | X | X | X | X | X | X | X | |
| 45×—† | X | X | X | X | X | X | X | X | X | |
| 50×10 | X | X | X | X | X | X | ||||
| 50×20 | X | X | X | X | X | X | X | X | ||
| 50×30 | X | X | X | X | X | X | X | X | X | |
| 50×40 | X | X | X | X | X | X | X | X | X | |
| 50×50 | X | X | X | X | X | X | X | X | ||
| 50×60 | X | X | X | X | X | X | X | X | ||
| 50×70 | X | X | X | X | X | X | X | X | ||
| 60×10 | X | X | X | X | X | X | ||||
| 60×20 | X | X | X | X | X | X | X | X | ||
| 60×30 | X | X | X | X | X | X | X | X | X | |
| 60×40 | X | X | X | X | X | X | X | X | ||
| 60×50 | X | X | X | X | X | X | X | X | ||
| 60×60 | X | X | X | X | X | X | X | X | ||
| 70×10 | X | X | X | X | X | X | ||||
| 70×20 | X | X | X | X | X | X | X | |||
| 70×25 | X | X | X | X | X | X | X | X | X | |
| 70×30 | X | X | X | X | X | X | X | X | X | |
| 70×40 | X | X | X | X | X | X | X | X | ||
| 70×50 | X | X | X | X | X | X | X | X | ||
| 70×60 | X | X | X | X | X | X | X | X | ||
Manufactured to DIN 2395, TS 5317, TS EN 10219-2 and TS EN 10305-5 standards, from DC01 (DIN 10130), S185, S235JR/J0/J2, S275JR/J0/J2 and S355JR/J0/J2 (DIN 10025) grade steel.
† Two additional 45 mm-bracket sizes are listed in the source production range without a printed sub-dimension — contact us to confirm the exact size of these variants.
| Kalınlık / Thickness (mm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Dimensions (mm) | 0.60 | 0.70 | 0.80 | 0.90 | 1.00 | 1.20 | 1.50 | 2.00 | 2.50 | 3.00 | 3.50 |
| Ø19 | X | X | X | X | X | X | |||||
| Ø25 | X | X | X | X | X | X | X | X | |||
| Ø28.6 | X | X | X | X | X | X | X | ||||
| Ø32 | X | X | X | X | X | X | X | ||||
| Ø38 | X | X | X | X | X | X | X | ||||
| Ø42 | X | X | X | X | X | X | X | ||||
| Ø45 | X | X | X | X | X | X | X | ||||
| Ø48.3 | X | X | X | X | X | X | |||||
| Ø51 | X | X | X | X | X | X | X | X | |||
| Ø54 | X | X | X | X | X | X | X | X | |||
| Ø57 | X | X | X | X | X | X | X | X | |||
| Ø60.3 | X | X | X | X | X | X | X | X | |||
| Ø63 | X | X | X | X | X | X | |||||
| Ø70 | X | X | X | X | X | X | |||||
| Ø76 | X | X | X | X | X | ||||||
Manufactured to DIN 2458 & 1615/2394-1/2, TS 6476, EN 10219-1/2 and TS EN 10305-3 standards, from DC01 (DIN 10130), S185, S235JR/J0/J2, S275JR/J0/J2 and S355JR/J0/J2 (DIN 10025) grade steel. Pipe profiles are produced as open (slit) or fully welded sections from black (hot rolled), pickled, cold rolled or galvanized steel coil — galvanized coating can also be applied after welding on request.
Share your specifications and our team will respond with pricing and lead times.
